BROWSE   |   LSD, INC
BRAND TOOLS

56-005
TOOLS
   • Adjustable Hole Cutter Drill Attachment with Dust Tray
  • Saves Time in Cutting and Clean-up

  • Great for Speaker Installations

  • Easy Assembly

  • A built-in pilot bit enters the target material and centers the cutter in the desired position while the dust tray encloses the cutting arena

  • Capture the cutting debris as you cut – no more dust cloud with debris everywhere!

  • The HC series Hole Cutter is available in two sizes: the HC10 for up to 10" holes (adjusts to cut holes from 1-1/4" to 10-1/4") and the HC12 for up to 12" holes (adjusts to cut holes from 1-1/4" to 12").

  • Included in the case is an extra standard blade, four counter weights, adjusting wrench, and hex wrench. Recommended for use with a minimum 18 volt drill.

   

81-230
TOOLS
   • Creep-Zit™ 30ft
  • Luminous Threaded Connector Wire Running Rod Kit

  • This kit is the luminous (glow in the dark) version of the standard Creep-Zit 30ft. kit

  • Four Luminous (glows in the dark) FiberFuse™ 6ft. push/pull rods with male and female threaded connector ends

  • One Luminous (glows in the dark) FiberFuse 6ft. push/pull rod with a fixed bull nose end and a female threaded connector end

  • Whisk Threaded Connector Tip

  • Ball Chain Lanyard (12” length)

  • Kit is packaged in a clear square plastic tube


62-368
TOOLS
   • ReBor-Zit™ Drill Bits
  • 3/4" ReBore-Zit (3/8" Pilot Size)

  • The Rebore-Zit drill bit is the only drill bit designed to enlarge a previously drilled hole while retaining the existing wire in that hole

  • The bit is fabricated with a custom made, hollow bodied drill bit containing a free spinning, swivel eyelet mounted to its pilot hole center shaft

  • Just secure your existing wire onto the eyelet and re-drill your hole to a larger size. The bit will not twist the wire

  • Each diameter has an associated pilot hole size

  • Use the appropriate Rebore-Zit bit to accommodate the pre-existing hole (pilot hole) and step-up in Rebore-Zit sizes until you obtain your desired final hole size


81-130
TOOLS
   • Creep-Zit™ 30ft
  • Threaded Connector Wire Running Rod Kit

  • This kit offers the essential components needed for a wide range of installation applications

  • Four FiberFuse™ 6ft. push/pull rods with male and female threaded connector ends

  • One FiberFuse 6ft. push/pull rod with a fixed bull nose end and a female threaded connector end

  • Whisk Threaded Connector Tip

  • Ball Chain Lanyard (12” length)

  • Kit is packaged in a clear square plastic tube


62-348
TOOLS
   • ReBor-Zit™ Drill Bits
  • 1/2" ReBore-Zit (3/8" Pilot Size)

  • The Rebore-Zit drill bit is the only drill bit designed to enlarge a previously drilled hole while retaining the existing wire in that hole

  • The bit is fabricated with a custom made, hollow bodied drill bit containing a free spinning, swivel eyelet mounted to its pilot hole center shaft

  • Just secure your existing wire onto the eyelet and re-drill your hole to a larger size. The bit will not twist the wire

  • Each diameter has an associated pilot hole size

  • Use the appropriate Rebore-Zit bit to accommodate the pre-existing hole (pilot hole) and step-up in Rebore-Zit sizes until you obtain your desired final hole size


58-005
TOOLS
   • Hid-N-Access™ - Reversible Wall Access Panel
  • 14" x 29" Hid-N-Access™ Panel

  • Convenient wall access panel offers an attractive alternative to conventional panel covers or costly wall and ceiling refinishing in new and retrofit installation situations

  • Simply cut a hole to the panel frame size and mount the access panel in a flush mount or surface mount configuration

  • Fabricated from durable, non-conductive, high-impact ABS plastic

  • Pop-out door provides quick, easy access and provides professional off-white standard textured finish

  • Panel can be painted, tiled or wall-papered for a custom finish


56-250
TOOLS
   • DeCoil-Zit™ Reel Holder
  • DeCoil-Zit Wire Reel Holder (up to 25" reels)

  • Capable of handling reel weights of up to 300 pounds

  • Anti-slip rubber feet provide grip to prevent slippage and sliding and prevent scratching the floor.

  • The DeCoil-Zit is a collapsible wire reel/spool holder that can be quickly assembled or disassembled for on-site use and easy storage

  • Model consists of two heavy duty tempered steel tripods, welded and finished in tough, purple powder coat finish that slide together with standard 1/2" conduit to form a stable platform for your wire reels (reel/spool not included).


62-338
TOOLS
   • ReBor-Zit™ Drill Bits
  • 3/8" ReBore-Zit (1/4" Pilot Size)

  • The Rebore-Zit drill bit is the only drill bit designed to enlarge a previously drilled hole while retaining the existing wire in that hole

  • The bit is fabricated with a custom made, hollow bodied drill bit containing a free spinning, swivel eyelet mounted to its pilot hole center shaft

  • Just secure your existing wire onto the eyelet and re-drill your hole to a larger size. The bit will not twist the wire

  • Each diameter has an associated pilot hole size

  • Use the appropriate Rebore-Zit bit to accommodate the pre-existing hole (pilot hole) and step-up in Rebore-Zit sizes until you obtain your desired final hole size


51-150
TOOLS
   • Versatile 15-in-1 Screwdrivers
  • MegaPro 15-in-1 Tamper Proof Bit Screwdriver

  • A textured non-slip main body for improved grip

  • A bit locking mechanism for secure and reliable fastener driving.

  • Has in-handle storage for the collection of included quick change bits

  • MegaPro 15-in-1 Screwdriver has limitless uses and can replace numerous fixed head screwdrivers in your tool box, saving space, weight and time spent trying to find that “other” screwdriver

  • The Tamper Proof Bit Model replaces the standard bits with more specialized bit heads, including double-ended Spanner, Hex key, socket pin head and tamperproof Torx bits.

  • The unique design also includes a rotating “palm” end cap to facilitate higher driving force and increased rotational torque when driving fasteners


58-004
TOOLS
   • Hid-N-Access™ - Reversible Wall Access Panel
  • 14" x 14" Hid-N-Access™ Panel

  • Convenient wall access panel offers an attractive alternative to conventional panel covers or costly wall and ceiling refinishing in new and retrofit installation situations

  • Simply cut a hole to the panel frame size and mount the access panel in a flush mount or surface mount configuration

  • Fabricated from durable, non-conductive, high-impact ABS plastic

  • Pop-out door provides quick, easy access and provides professional off-white standard textured finish

  • Panel can be painted, tiled or wall-papered for a custom finish


65-272
TOOLS
   • Premium Flexible High-Speed Steel Drill Bits
  • 3/8" x 72" Premium Freeform Bit

  • High speed steel offers superior functionality

  • Designed to drill through steel plates as well as wood

  • 118 degree point provides more gradual breakthrough and limits the grabbing that occurs when using a traditional 135 degree point

  • Split point tip and slow spiral design improves bit self-cleaning and eases pull back

  • 3/16" flexible shaft allows you to easily align the bit along a stud for reference drilling

  • Holes in drill bit head and chuck end for attaching wire

  • Manufactured in the U.S.A. by Freeform

   

65-436
TOOLS
   • Premium Masonry Bits
  • Premium Freeform Masonry Bit 3/8" x 36"

  • This high quality percussion masonry bit has a 118 degree carbide tip for precision feeding and cleaner holes

  • This bit offers superior strength compared to other masonry bits

  • Fabricated in U.S.A. by Freeform to our high standards.


65-258
TOOLS
   • Premium Flexible High-Speed Steel Drill Bits
  • 3/8" x 58" Premium Freeform Bit

  • High speed steel offers superior functionality

  • Designed to drill through steel plates as well as wood

  • 118 degree point provides more gradual breakthrough and limits the grabbing that occurs when using a traditional 135 degree point

  • Split point tip and slow spiral design improves bit self-cleaning and eases pull back

  • 3/16" flexible shaft allows you to easily align the bit along a stud for reference drilling

  • Holes in drill bit head and chuck end for attaching wire

  • Manufactured in the U.S.A. by Freeform

   

65-248
TOOLS
   • Premium Flexible High-Speed Steel Drill Bits
  • 3/8" x 48" Premium Freeform Bit

  • High speed steel offers superior functionality

  • Designed to drill through steel plates as well as wood

  • 118 degree point provides more gradual breakthrough and limits the grabbing that occurs when using a traditional 135 degree point

  • Split point tip and slow spiral design improves bit self-cleaning and eases pull back

  • 3/16" flexible shaft allows you to easily align the bit along a stud for reference drilling

  • Holes in drill bit head and chuck end for attaching wire

  • Manufactured in the U.S.A. by Freeform

   

65-424
TOOLS
   • Premium Masonry Bits
  • Premium Freeform Masonry Bit 3/8" x 24"

  • This high quality percussion masonry bit has a 118 degree carbide tip for precision feeding and cleaner holes

  • This bit offers superior strength compared to other masonry bits

  • Fabricated in U.S.A. by Freeform to our high standards.


85-124
TOOLS
   • Wet Noodle™ - Magnetic In-Wall Retrieval System
  • Wet Noodle and Retrievers

  • Accept no inferior knock-off products - use the original - the Wet Noodle Retriever System

  • The Wet Noodle Retrieval System has been updated to now contain three components:

  • A 24" flexible insulated retriever with an ultra strong earth magnet attached at one end; 10ft. of lightweight ball chain with a stop-ring; and an 18" telescoping pocket retriever

  • This system provides a fast and easy solution to connecting an in-wall entry point to an exit point blindly (without vision tools) to pull wire.


81-206
TOOLS
   • Creep-Zit™ Threaded Connector Single Replacement Rods
  • Creep-Zit 6ft. Luminous Rod w/ Threaded Male/Female Connectors

  • These single rods allow you to replace lost rods or add length to your Creep-Zit Kits

  • Not compatible with RoyRods Quick Connect


81-216
TOOLS
   • Creep-Zit™ Threaded Connector Single Replacement Rods
  • Creep-Zit 6ft. Luminous Rod w/ Bull Nose/Threaded Female Connectors

  • These single rods allow you to replace lost rods or add length to your Creep-Zit Kits

  • Not compatible with RoyRods Quick Connect


65-236
TOOLS
   • Premium Flexible High-Speed Steel Drill Bits
  • 3/8" x 36" Premium Freeform Bit

  • High speed steel offers superior functionality

  • Designed to drill through steel plates as well as wood

  • 118 degree point provides more gradual breakthrough and limits the grabbing that occurs when using a traditional 135 degree point

  • Split point tip and slow spiral design improves bit self-cleaning and eases pull back

  • 3/16" flexible shaft allows you to easily align the bit along a stud for reference drilling

  • Holes in drill bit head and chuck end for attaching wire

  • Manufactured in the U.S.A. by Freeform

   

65-224
TOOLS
   • Premium Flexible High-Speed Steel Drill Bits
  • 3/8" x 24" Premium Freeform Bit

  • High speed steel offers superior functionality

  • Designed to drill through steel plates as well as wood

  • 118 degree point provides more gradual breakthrough and limits the grabbing that occurs when using a traditional 135 degree point

  • Split point tip and slow spiral design improves bit self-cleaning and eases pull back

  • 3/16" flexible shaft allows you to easily align the bit along a stud for reference drilling

  • Holes in drill bit head and chuck end for attaching wire

  • Manufactured in the U.S.A. by Freeform

   

65-218
TOOLS
   • Premium Flexible High-Speed Steel Drill Bits
  • 3/8" x 18" Premium Freeform Bit

  • High speed steel offers superior functionality

  • Designed to drill through steel plates as well as wood

  • 118 degree point provides more gradual breakthrough and limits the grabbing that occurs when using a traditional 135 degree point

  • Split point tip and slow spiral design improves bit self-cleaning and eases pull back

  • 3/16" flexible shaft allows you to easily align the bit along a stud for reference drilling

  • Holes in drill bit head and chuck end for attaching wire

  • Manufactured in the U.S.A. by Freeform

   

58-003
TOOLS
   • Hid-N-Access™ - Reversible Wall Access Panel
  • 8" x 8" Hid-N-Access™ Panel

  • Convenient wall access panel offers an attractive alternative to conventional panel covers or costly wall and ceiling refinishing in new and retrofit installation situations

  • Simply cut a hole to the panel frame size and mount the access panel in a flush mount or surface mount configuration

  • Fabricated from durable, non-conductive, high-impact ABS plastic

  • Pop-out door provides quick, easy access and provides professional off-white standard textured finish

  • Panel can be painted, tiled or wall-papered for a custom finish


70-101
TOOLS
   • Rite-Zit™ - Cable & Wire Labeling System
  • Rite-Zit Labeler w/ Refill - Std. (3/4"x 1-1/4")

  • The Rite Zit™ labeling system is designed to easily and professionally identify wires for future reference

  • The tool feeds pre-loaded adhesive labels through a writing “window” to enable you to easily write onto the label with a number, name or other identifier before affixing the label to the wire or cable

  • The labels will work with pencil, pen or marker

  • Each label provides a white writing surface and a clear protective tail that wraps back over the white label to protect the marking from being rubbed off

  • The label is affixed to the wire or cable surface – superior to a “flag” label that can tear off


81-116
TOOLS
   • Creep-Zit™ Threaded Connector Single Replacement Rods
  • Creep-Zit 6ft. Rod w/ Bull Nose/Threaded Female Connectors

  • These single rods allow you to replace lost rods or add length to your Creep-Zit Kits

  • Not compatible with RoyRods Quick Connect


81-106
TOOLS
   • Creep-Zit™ Threaded Connector Single Replacement Rods
  • Creep-Zit 6ft. Rod w/ Threaded Male/Female Connectors

  • These single rods allow you to replace lost rods or add length to your Creep-Zit Kits

  • Not compatible with RoyRods Quick Connect


56-002
TOOLS
   • Metal Cutting Blade (for 10" or 12")
  • Hole-Cutte Drill Attachment 10" or 12" Accessory Metal Cutting Blade

  • Blade Only


56-001
TOOLS
   • Standard Blade (for 10" or 12")
  • Hole-Cutter Drill Attachment 10" or 12" Replacement Blade

  • Blade Only


58-002
TOOLS
   • Hid-N-Access™ - Reversible Wall Access Panel
  • 6" x 9" Hid-N-Access™ Panel

  • Convenient wall access panel offers an attractive alternative to conventional panel covers or costly wall and ceiling refinishing in new and retrofit installation situations

  • Simply cut a hole to the panel frame size and mount the access panel in a flush mount or surface mount configuration

  • Fabricated from durable, non-conductive, high-impact ABS plastic

  • Pop-out door provides quick, easy access and provides professional off-white standard textured finish

  • Panel can be painted, tiled or wall-papered for a custom finish


81-310
TOOLS
   • Creep-Zit Whisk
  • Male Threaded Connector Tip

  • This tip is shaped like a whisk to help guide your rods over obstructions, beams, insulation and other structures

  • The multi-spoked whisk also acts as a “wheel” to allow you to steer your tip sideways

  • As you twist your rod, the tip will “roll” sideways, allowing you to accurately steer the tip across a surface.


82-370
TOOLS
   • Creep-Zit J-Tip
  • Male Threaded Connector Tip

  • Uncoil coax or other cable

  • Use this tip for retrieving wire from a distance or retrieving metal fish tape

  • The J-Tip is compatible with both the Creep-Zit threaded rods and the Grabbit telescoping poles (with adapter)


58-001
TOOLS
   • Hid-N-Access™ - Reversible Wall Access Panel
  • 4" x 6" Hid-N-Access™ Panel

  • Convenient wall access panel offers an attractive alternative to conventional panel covers or costly wall and ceiling refinishing in new and retrofit installation situations

  • Simply cut a hole to the panel frame size and mount the access panel in a flush mount or surface mount configuration

  • Fabricated from durable, non-conductive, high-impact ABS plastic

  • Pop-out door provides quick, easy access and provides professional off-white standard textured finish

  • Panel can be painted, tiled or wall-papered for a custom finish


51-140
TOOLS
   • F Connector Finger Protector
  • Small and lightweight – fits into your pocket

  • Color coded for F and BNC Connector types.

  • Slides easily over straight or bent cables behind equipment.

  • Dimensions: Each tool is 1-1/2" width x 2" depth.

  • These handy connector tools protect your fingers when working with BNC connectors or F-Connectors in dense spaces such as rack systems or panels.


70-301
TOOLS
   • Rite-Zit™ - Cable & Wire Labeling System
  • Rite-Zit Refill Labels - Std. (200 x 3/4"x 1-1/4")

  • Label Refill Only

      BROWSE   |   LSD, INC  |