BROWSE   |   ELK
BRAND CROSS PLATFORM

M1XRF2G
CROSS PLATFORM
   • M1 Wireless Receiver and Input Expander
The ELK-M1XRF2G is a Wireless (RF) Receiver and Input Expander for use with the ELK-M1 and ELK-M1EZ8 Controls. The receiver connects to the four (4) wire data (keypad) bus of the control and integrates in much the same way as a M1XIN hardware zone expander except that a single M1XRF can handle up to 144 wireless zones (e.g. transmitter sensors or points). The M1XRF2G receiver uses Crystal frequency technology and is a dual (2) antenna, phase diversity design capable of long range wireless coverage.
    Features Include:
  • Adds up to 144 individual wireless zones (sensors/points)
  • Operates from the 4 wire RS485 Data Bus
  • Additional Receivers (up to 11) may be Connected to a single M1 or M1EZ8 Control for redundancy or greater coverage
  • Flash Memory for Updating of operating Firmware
  • Sensitivity: >105 dbm
  • Operating Temperature: 0 to +120 degrees F
  • Operating Voltage: 12 Volts D.C.
  • Current Draw: 70mA
  • Range: 300 to 500 ft. line of sight (Up to 1000 ft. with ground plane antennas)

M1KP2
CROSS PLATFORM
   • ELK-M1 LCD Keypads
The ELK-M1KP2 is a low profile, addressable LCD Keypad for the M1 family of Cross Platform ControlsÒ. It features a 32 character blue/white backlighted display, blue lighted keys, 4 programmable function keys, along with the ELK menu navigation keys. It may also be recess ’flush’ mounted using with a separately purchased back box kit (ELK-M1BBK2). The M1KP2 is compatible with "external" 26 bit Wiegand compatible proximity readers, allowing cards or fobs to be used for arming, disarming, or limited door strike control, etc.
    Features Include:
  • Blue/white Backlighted Hi-Contrast LCD Display
  • Four (4) Programmable Function Keys
  • Unique Menu Navigation/Direction Keys
  • Operates from the M1/EZ8 ’RS-485’ Data Bus
  • Built-in Piezo Sounder with adjustable pitch
  • Accepts "External" 26 bit Wiegand Prox Reader (Optional)
  • Built-in Speaker with Adjustable Beep Tone and Volume
  • Input for 1 Supervised Zone
  • One Programmable "Switched Positive" Voltage Output
  • Exit, Stay, Chime, and Bypass Keys
  • Surface mounts to a standard 1 or 2 gang electrical box
  • Optional recess ’flush’ mount kit available (ELK-M1BBK2)

TRG1640
CROSS PLATFORM
   • Auto-Resetting Transformers
Auto-resetting, lifetime warranted transformers with grounding prong and grounding screw terminal. Step down transformer for low voltage systems, such as Access Control, Security & CCTV..
    Features Include:
  • Wire Strain Relief
  • Auto-Resetting (PTC) Fused Secondary
  • Green Power On LED
  • Grounding Prong & Terminal
  • Electrical outlet mounting tab
  • UL Listed
  • Color: White
  • Size: 4.14" H x 2.74" W x 2.2" D
  • Lifetime Limited Warranty

M1XOVR
CROSS PLATFORM
   • M1 16 Output Expander, 8 Voltage & 8 Relays
Adds 16 outputs (8 voltage, 8 relays) to M1 Gold or M1EZ8 Controls. Voltages can be used to trigger low current devices (50 mA max. each). Relays are SPDT rated for 7A @ 30 VDC, 10A @ 125 VAC. Operates from 4-wire data bus. Up to 12 output expanders may be used for a total of 208 outputs. Option: Convert 8 voltage outputs to relays using M1RB Relay Board.
    Features Include:
  • 8 Voltage Outputs
  • 8 Single-Pole, Double-Pole Relay Outputs
  • Operates on the 4-Wire Data Bus
  • DIP Switch Address Settings
  • Flash Memory for Firmware Updating
  • One (1) - Twelve (12) Conductor "Flying Lead" Wire Harness
  • Voltage Outputs may be converted to Relays using M1RB Relay Boards
  • Status LED with Diagnostic Display
  • Mounts in Enclosure using ELK-SWG Glides, SWP or SWP3 Structured Wire Plates, or Double Sided Foam Tape

73
CROSS PLATFORM
   • Compact Echo Speaker
May be painted or wallpapered to please the most discerning decorator. Mounts to any single gang electrical box or in same hole pattern as SS36 style.
    Features Include:
  • Small, Interior Speaker
  • Great for Voice and Sounds
  • Impedance: 8 Ohms
  • Rating: 20 Watts Nominal
  • Frequency Response: 500 to 7000 Hz
  • Size: 4.56" H x 4.3" W x 1.875" D

M1XIN
CROSS PLATFORM
   • M1 16 Zone Input Expander
Adds 16 hardwired zones (EOL resistor supervised) to the M1 Gold or M1EZ8 Controls. Operates from 4-wire data bus. Up to 12 of these can be used, increasing total zones (inputs) to 208.
    Features Include:
  • 16 EOL Resistor Supervised Hardwire Zones
  • Operates on the 4-Wire Data Bus
  • DIP Switch Address Settings
  • Flash Memory for Firmware Updating
  • Plug-In Terminal Strips
  • Status and Diagnostic LED
  • On-Board EOL Bus Termination Jumper
  • Vertical Mounting using ELK-SWG Glides(included)

M1XSP
CROSS PLATFORM
   • M1 Serial Port (RS232) Expander
Additional serial port(s) for M1 Controls to interface other manufacturer's equipment utilizing RS-232 ASCII commands.
    Features Include:
  • M1XSPs operate from the 4-wire data bus, alloing them to be placed long distances from the control
  • Flash Memory for Firmware Updating
  • Dip Switch Adresss Setting
  • Adapts HVAC Communicating Thermostats to M1 Cross Platform Controls
  • Baud rate is adjustable from 300 to 38,400
  • Up to 7 M1XSP Expanders may be added to M1 Controls
  • AMX, Control 4, and Crestron, interface with main serial port

M1KPAS
CROSS PLATFORM
   • Economical LED Keypad
Small, economical, arm/disarm station for M1 Controls which fits into single gang box and utilizes a standard decorator style faceplate (not included). Particularly well suited for partitioned jobs such as an office, workshop, garage, etc., but can also be used as the main keypad for any installation. Displays basic system status with 3 LEDs: Green "Ready", Yellow "Trouble", and Red "Armed". The 12 button keypad is backlit with blue LEDs and has quick arm keys for “EXIT” and “STAY”. The M1KPAS also provides access to six (6) programmable function operations by pressing the "F" key followed by the number key (1-6) within 5 seconds
    Features Include:
  • Blue Backlit Keys
  • Quick Arm Exit & Stay Keys
  • LED Status Indication
  • Instant Activation of 6 Tasks
  • Operates from M1G or EZ8 'RS-485" Data Bus
  • Built-in Piezo Sounder

M1BBK2
CROSS PLATFORM
   • Recess Mount Back-box Kit
    Features Include:
  • Size: 4.312” W x 5.375” H x 1” D

SP12F
CROSS PLATFORM
   • Flush Mount Speaker
Compact, low profile design. Wall plate size allows unit to be unnoticed at outlet height. 32 ohm impedance allows multiple speakers to be wired in parallel while maintaining a overall load rating that is acceptable for most control panels.
    Features Include:
  • Ideal for alarm or voice applications
  • Fits most single gang electrical boxes
  • Lifetime Limited Warranty

1RT
CROSS PLATFORM
   • Speaker & Stainless Steel Enclosure
Rugged quality, multi-purpose speakers and sirens with tamper resistant "no rust" enclosure are perfect for all type jobs. With their compact design and stainless steel construction, these speakers and sirens naturally reflect the mounting surface, blending easily into the surroundings. Great for harsh environments.
    Features Include:
  • Clear Voice & Sound Reproduction
  • High Fidelity Voice Coil
  • Impedance: 8 Ohms
  • Rating: 30 Watts nominal / 50 Watts Peak
  • Frequency Response: 500 to 7000 Hz
  • Heavy Duty Magnet
  • Rust Free
  • Lifetime Limited Warranty

USB232
CROSS PLATFORM
   • This special cable is needed for connecting the M1 Gold or M1EZ8 Control to the Computer whenever the Computer does not have a conventional RS-232 9-pin serial port. Most modern laptops and many desktop computers are only equipped with USB ports.

W039A
CROSS PLATFORM
   • 2 Wire Cable Assembly for connecting an External Prox Reader such as the ELK-106055

950
CROSS PLATFORM
   • Elk Surge Suppressor
Solid state, Single Telephone Line & Low Voltage Surge Suppressor for control systems or systems connected to phone lines. Response time of less than 1 nanosecond.
    Features Include:
  • Protects 1 Incoming Phone Line and AC Input from Transformer
  • Telephone Breakover: 300 Volts
  • Max AC Input Voltage: 24VAC
  • AC Breakover: 50 Volts
  • Peak Pulse Current: 100 Amps
  • Convenient Test points for Lineman's Test set

902-2
CROSS PLATFORM
   • White Gel Filled "B" Connectors
For solid, dependable splicing of 18 to 30 gauge wires in moist environments.
    Features Include:
  • Non-hardening Gel Moisture Barrier Forms corrosion resistant splice
  • Easy to Squeeze Soft Brass Crimp
  • Built-in Test Point
  • Insulation Piercing Internal Teeth
  • Durable Protective Outer Covering
  • No Markings on Jacket
  • 2 Handy Zip Lock Bags of 250 pcs each
  • 500 pcs per box
  • Packaged in Reusable Poly Storage Box

900-2
CROSS PLATFORM
   • Yellow Jackets Unfilled "B" Connectors
For solid, dependable splicing of 18 to 30 gauge wires
    Features Include:
  • Easy to Squeeze Soft Brass Crimp
  • Built-in Test Point
  • Insulation Piercing Internal Teeth
  • Durable Protective Outer Covering
  • 2 Handy Zip Lock Bags of 250 pcs each
  • 500 pcs per box
  • Packaged in Reusable Poly Storage Box
      BROWSE   |   ELK  |